V-M双闭环直流可逆调速系统设计分析.docVIP

课程设计任务书 题 目: V-M双闭环直流可逆调速系统设计 1．技术数据技术指标： Ω 堵转电流 Idbl=2IN , 截止电流 Idcr=1.5IN ，GD2=3.53N.m2 三相全控整流装置：Ks=40 , Rrec=1. 3Ω 平波电抗器：RL=0. 3Ω 电枢回路总电阻 R=2.85Ω ，总电感 L=200mH , 滤波时间常数：Toi=0.002s , Ton=0.01s, 其他参数：Unm*=10V , Uim*=10V , Ucm=10V σi≤5% , σn≤10 要求完成的主要任务: 1．技术要求： 该调速系统能进行平滑的速度调节，负载电机可逆运行，具有较宽的调速范围（D≥10），系统在工作范围内能稳定工作 系统在5%负载以上变化的运行范围内电流连续 ．设计内容： 1) 根据题目的技术要求，分析论证并确定主电路的结构型式和闭环调速系统的组成，画出系统组成的原理框图 调速系统主电路元部件的确定及其参数计算（包括有变压器、电力电子器件、平波电抗器与保护电路等） 动态设计计算：根据技术要求，对系统进行动态校正，确定ASR调节器与ACR调节器的结构型式及进行参数计算，使调速系统工作稳定，并满足动态性能指标的要求 绘制V-M双闭环直流可逆调速系统的电气原理总图（要求计算机绘图） 整理设计数据资料，课程设计总结，撰写设计计算说明书 课程设计时间为一周半，共分为三个阶段： 复习有关知识，查阅有关资料，确定设计方案。约占总时间的20% 根据技术指标及技术要求，完成设计计算。约占总时间的40% 完成设计和文档整理。约占总时间的40% 指导教师签名： 年 月 日 系主任（或责任教师）签名： 年 月 日 目录 摘要······························································1 1设计任务及要求··················································2 1.1技术数据····················································2 1.2设计要求····················································2 2双闭环调速系统的总体设计········································2 3主电路的设计····················································5 3.1主电路电气原理图及其说明····································5 3.2平波电抗器参数的计算········································6 3.3 变压器参数的计算············································7 3.4晶闸管元件参数的计算········································7 3.5保护电路····················································8 4电流调节器的设计················································9 4.1电流环结构框图的化简········································9 4.2电流环参数的计算···········································10 4.2.1确定时间常数··········································10 4.2.2电流调节器结构的选择··································10 4.2.3计算电流调节器的参数··································11 4.2.4校验近似条件··········································11 4.2.5计算调节器的电阻和电容································12 5转速调节器的设计···············································1