DA-130N手持式密度计比重计使用说明书分析报告.pdf

手持式 密度/比重計 DA-130N 中文操作手冊 請在實際使用測定前詳細閱讀操作手冊. 成都锐新仪器仪表有限公司译制 Ver.00 #595-0290 目錄 手持式密度/比重計Portable Density/Specific Gravity Meter 1 安全上的預防Safety Precautions 1 1 介紹Introduction 3 2. 關於此手冊About the manual 4 3. 提供的配件Supplied parts 5 4. 結構部份Parts configuration 2 4.1 外觀正面Front view 6 4.2 外觀側面Side view 6 4.3 外觀背面Rear view 7 4.4 顯示螢幕Display window 2 4.5 操作部份Operating unit 9 5. 測定準備Preparation for measurement by DA-130 10 5.1 裝上電池Loading the battery 10 5.2 裝上取樣管Setting the sampling nozzle 11 5.3 安裝備註護墊Setting the memo pad 11 5.4 初步的試驗Preliminary test 12 6. 設定溫度單位, 測定單位和方式Setting temperature unit, measuring unit and mode 13 6.1 溫度單位Temperature unit 13 6.2 測定單位Measuring unit 13 6.3 測定方式的結構Configuration of measurement mode 17 7. 實際測定Actual measurement 18 7.1 測定上的警告Cautions on measurement 18 7.2 樣品測定Sample measurement 19 7.2.1 當使用內藏式注射器When the built-in syringe is used 19 7.2.1.1 測試物質的取樣Sampling test materials 19 7.2.1.2 開始測定Start measurement 19 7.2.1.3 固定測定數據Hold measurement data 19 7.2.1.4 儲存測定數據Saving measurement data 19 7.2.2 使用商業上可利用的塑膠注射器The use of commercially available plastic syringe 20 7.2.2.1 取樣Sampling20 7.2.2.2 開始測定Start measurement 20 7.2.2.3 固定測定數據Hold measurement data 20 7.2.2.4 儲存測定數據Saving measurement data 20 8. 測定槽的校正Calibration of measuring cell21 8.1 以純水校正Calibration with pure water 21 8.2 以標準液校正Calibration with standard liquid 22 8.2.1 校正使用已知密度的標準液體Calibration with standard liquid of which density is known 22 8.3 以空氣校正Calibration with air 22 8.3.1 以空氣校正Calibration with air 22 8.3.2 如何乾燥測定槽How to dry the cell 23 8.3.3 以空氣校正的程序Procedure of calibration with air24 8.4 顯示溫度的校正Calibration of displayed temperature 25 8.5 重新校正Recalibration25 9. 數據處理的應用Application of data proce