玻化微珠保温墙模复合剪力墙承载力研究.pdfVIP

第25 卷增刊I Vol.25 Sup. I 工 程 力 学 2008 年 6 月 June 2008 ENGINEERING MECHANICS 141 文章编号：1000-4750(2008)Sup.I-014 1-07 玻化微珠保温墙模复合剪力墙承载力研究 * 刘元珍，李 珠，杨卓强 (太原理工大学建筑与土木工程学院，山西，太原 030024) 摘 要：适应建筑节能的要求，提出一种新型保温承重结构体系——玻化微珠保温墙模复合剪力墙体系。通过轴 压试验研究与有限元模拟分析，确定单片免拆墙模复合剪力墙在轴向压力作用下的承载能力，了解复合剪力墙的 破坏形态、变形能力。同时进行传统剪力墙轴压试验研究及数值模拟，比较两种墙体的强度及平面外稳定性，确 定墙模对内部混凝土的复合增强作用。试验及模拟分析结果均表明本体系复合剪力墙在正常使用荷载下具有较大 的承载能力和刚度，具有很好的整体工作性能。研究成果可以为保温墙模复合剪力墙的工作性能评价和安全设计 提供理论依据。 关键词：建筑节能；玻化微珠；保温；复合剪力墙；承载力；平面外稳定 中图分类号：TU311.3 文献标识码：A STUDY ON BEARING CAPACITY OF COMPLEX SHEAR WALL WITH GHB HEAT PRESERVATION FORMWORK * LIU Yuan-zhen , LI Zhu , YANG Zhuo-qiang (College of Architecture Civil Engineering, Taiyuan University of Technology, Taiyuan, Shanxi 030024, China) Abstract: With the implementation of the policies about energy efficiency in buildings, a kind of new structure— Complex shear wall structure with heat preservation formwork by glazed hollow bead(GHB) was developed. Experimental work and finite element analysis on the complex shear walls were introduced. Based on the complex shear wall specimen experiment under vertical loading and numerical simulation, some characteristics of the new structure were analyzed, including the bearing capacity, failure mode, distortion capability. Meanwhile, the common shear wall specimen test and analysis were carried on. Aimed at the reinforcing effect, the strength and the out plane stability were contrasted between the two kind of shear walls. Both the experiment and FEM analysis results show that complex shea