快速入门指南_15313.pdf

快速入门指南 QUICKSTART GUIDE SET IT UP To add a SONOS PLAY:3™ to an existing Sonos system just plug it in and select Add a Sonos Component from the Settings menu on your handheld controller, or select Add a Sonos Component from the Manage menu when using the Sonos Controller for Mac or PC. To set up a new SONOS system, turn to steps 1-4. ConnECT A SonoS CoMPonEnT To Y oUR RoUTER A - IF YoU PURCHASED A SonoS BRIDGE, ConnECT An ETHER nET CABLE (SUPPLIED) FRoM EITHER onE oF THE ETHERnET PoRTS on THE BRIDGE T o A n oPEn P oRT on Y oUR RoUTER. B - IF YoU DID noT PURCHASE A SonoS BRIDGE, ConnECT THE PLAY:3 To Y oUR RoUTER I nSTEAD. A B oR ROUTER BRIDGE PLAY:3 ROUTER PLAY:3 Note: Connecting a BRIDGE to your router allows you to use the PLAY:3 wirelessly in your home. PLACE ADDITIonAL SonoS CoMPonEnTS In THE R ooMS oF YoUR CHoICE AnD APPLY PowER (oPTIonAL) YoU w ILL BE PRoMPTED To ADD THEM To YoUR SonoS SYSTEM In STEP 3. DownLoAD A SonoS ConTRoLLER APP SonoS ConTRoLLER APP IS REQUIRED To SET UP YoUR SonoS SYSTEM (DownLoAD InSTRUCTIonS BELow). PLEASE DownLoAD THE APP, LAUnCH IT, AnD THEn FoLLow THE PRoMPTS To SET UP YoUR SonoS SYSTEM. 1 Download the Sonos App software for your Mac or PC here: /install. 2 Download the Sonos Controller App for your smartphone or tablet from the application store on your device. 3 Please add the Bridge or PLAY:3 that’s connected to your router before adding other components. 4 Press Mute and Volume Up Buttons simultaneously. BRIDGE Connect button PLAY:3