螺旋千斤顶毕业设计基于Proe的螺旋千斤顶的设计详解.doc

晋 中 学 院 本 科 毕 业 设 计（论文） 学 院 学院 专 业 机械设计制造及其自动化 学生姓名 班级学号 指导教师 二零一年六月 　　 学生应交出的设计文件（论文）： 1．图纸 （1）A1图纸1张。 （）A1或A2）。 （）A1图纸1张。2．说明书 （1） （2） （）。（以上内容全部采用计算机制作）[1] 邱宣怀等编著．出版社，20 [2] 闻邦春．．机械工业出版社，200[3] 教育部高等教育司等编.高等学校毕业设计（论文）指导手册. [M]．北京： [4] 和青芳 周四新等编著.Pro/ENGINEER Wildfire 4.0基础设计实例精讲[M].北京：机械工业出版社，2009 [5] 钟日铭等编著.Pro/ENGINEER Wildfire 4.0 完全实例解析（第2版）[M] 北京：机械工业出版社，2008 专 业 班 级 学 生 设计（论文）工作起止日期 指导教师签字 日期 专业（系）主任签字 日期 　　 摘 要 关键词：螺旋千斤顶设计装配pro/e；仿真 Abstract The graduation project is to design a mechanical screw jack, the main design elements is the calculation of the size of the various parts, checking the strength of the special parts, to achieve a reasonable request under the premise of the pro / e assembly and simulation. First, by calculating the parameters check the manual as well as books to take reasonable parameters, and then modify the size, in the process of checking the structural data on the whole more optimization. Secondly, the pro / e assembly, we should pay attention to the types of constraints and constraint object known constraint conditions are not met, the new benchmark as a constrained object will affect the overall simulation. In the simulation to add two motors, respectively, as the up and down movement and rotation, to choose a reasonable speed before the capture. Export a reasonable view and proportion guide drawings, the new drawing, select, and then modify and save as dwg format files on the basis of this figure. In this graduation project, understand the principle of the structure of the jack, and recognize the role of three-dimensional modeling in the design process, learned a simple