工业模拟监控系统要点分析.doc

着信息化、数字化在各行各业的迅猛发展，工业系统中的信息化、数字化也将成为未来的发展趋势。工业系统中，司乘人员在空间狭小的操作仓里，经常要面对功能众多、大小不等、量程各异的仪表盘，这些仪表盘不仅占用空间，而且不够直观，情况紧急时，容易造成司乘人员的误操作或反应滞后，给操作带来不必要的麻烦。本系统以温度电压频率为例，提出一种测量频率、电压、温度的方法，更加直观地进行系统供频率、电压、温度的监测，并能在超过设定限度后发出警报，做出简单的处理。在一定程度上保定参数的恒定。 所以设计中提出了一个智能温度频率和电压监测系统的设计方案，该方案用的单片机为CPU来实现的，将采集到的信号输入单片机系统，通过软件的控制，将电压，频率，温度的数值通过查表的方式得出结果。功能是实现温度和电压的连续监测，并通过数码管显示出来，如超限则报警。它的按键电路实现设置温度及电压的上限值，；当采集到的温度或电压超过用户设的限值时，报警电路发出报警信号，并通过单片机的控制模块，作出一系列反应，保证工厂的正常运转。开始状态下，数码管显示hello,其中通过键盘的设置可以转换不同对象测量与控制。 关键词：自动控制；温控；频率；电压；电机控制 ABSTRACT Along with the digital information, in all walks of life, and the rapid development of information industry system, digital will become the future trend of development. Industrial system, in the narrow space by operating barns, and often faced many functions, different sizes, range, the dashboard only occupied panel space, and not intuitive, an emergency, easy cause by the personnel department incorrect operation or reaction to operate lags behind, cause unnecessary trouble. In this system, for example, the temperature voltage frequency proposed measure frequency and voltage, temperature, more intuitively systems for frequency and voltage, temperature monitoring, and can be set limits on alert after more, make simple processing. In a certain extent, baoding parameters constant. So the design of an intelligent temperature forward frequency and voltage monitoring system, the design of the scheme for the use of the CPU chip, will be collected signal input software, through the SCM system, control voltage, frequency, temperature value through check result. Function is continuous monitoring of voltage and temperature, and through digital display, such as the off-gauge tube is alarming. Its key circuit implementation of voltage and temperature setting of the upper limit value. When the temperature or collected over the voltage limit users, alarm circuit issued a warning signal, and through the MCU control module, and made a series of reactions, and ensure the norm