汽车后备箱裙板支架自动送料级进模设计 毕业设计说明书.doc

毕业设计（论文 题目：学院专业 学 号 学生姓名 指导教师 二〇一三年月 摘 要ABSTRACT Punching die has been widely used in industrial. more Self-acting feed technology of punching die is also used in production, punching die could increase the efficiency of production and could alleviate the work burden，so it has significant meaning in technologic progress and economic value. In this design, first we use the 3D sculpt function of UG to create 3D model of the part. During the procedure, the work piece’s craftwork character is analyzed, the work piece’s 2-D drawing and 3-D mold are made, so that the work piece can be better comprehended. Learn the structural craftwork character of the work piece, so does the drawing and forming craftwork character. Make sure the work piece’s craft project, compare them and make the final decision. Calculate the size of the roughcast and select its shape. Calculate the times of the drawings, make sure the size of the semi-manufactured work piece of every steps, and draw the working procedure’s sketch. Calculate the every working pressure, design and draw die’s sketch, select every appropriate parts. Comprehend every needed dies’ character and the issues that is needed to be paid more attention. On the base of the dies’ sketch ，the dies’ structure is analyzed, and then go on designing their structures and selecting punch equipments. Keywords: Craft project 、manufacture 、structure design . 目 录 摘 要 I ABSTRACT II 第一章 绪论 1 1.1冲压技术的发展及应用 1 1.2模具发展现状 2 1.3本课题的主要内容与意义 2 第二章 工艺分析及冲压方案确定 3 2.1冲压件的工艺分析 3 2.2工艺方案的分析和确定 4 2.2.1工艺方案分析 4 2.2.2.冲压工艺方案的确定 5 2.3冲压排样图设计： 5 2.3.1排样原则： 5 2.3.2排样图： 7 第三章 模具主要工艺参数计算 8 3.1模具冲裁间隙选择 8 3.2模具刃口尺寸计算 9 3.2.1冲裁刃口尺寸计算的基本原则 9 3.2.2冲裁力的计算 9 3.2.3刃口尺寸的计算 9 3.3拉深工艺及模具设计 16 3.3.1 盒型拉深成型原理 16 3.3.2拉深工艺性分析 17 3.3.3拉深件圆角半径的要求 18 3.3.4拉深件工序安排的一般原则 18 3.3.5 拉深次数确定 18 3.3.6拉深力的计算 19 3.3.7拉深凸凹模的间隙 19 3.3.8拉深凸凹模径向尺寸计算 19 3.4局部成型 19 3.4.1零件成型工艺分析 19 3.4.2.极限变形程度： 20 3.4.3局部成型力 20 3.5弯曲成型 20 3.5.1弯曲件的结构工艺性 20 3.5.2.弯曲件精度 20 3