汽车后视镜注塑模具设计 毕业设计论文.doc

工学学士学位论文 汽车后视镜注塑模具设计  工学学士学位论文 汽车后视镜注塑模具设计 本 科 生： 导师： 申请学位级别： 工学学士 工程领域： 机械工程 所在单位： 机械工程学院 答辩日期： 授予学位单位：  Dissertation for the Bachelor Degree of Engineering Plastic Injection Mould Design of a Rearview Mirror of an Automobile Candidate： Supervisor： Academic Degree Applied for： Bachelor of Engineering Professional Field： Mechanical Engineering Date of Oral Examination： March，200University：  汽车后视镜注塑模具设计 摘要 CAD/CAE/CAM软件智能化的高速发展，塑料制件及模具的3D设计与成型过程中的CAE分析，将在我国塑料模具工业中发挥越来越重要的作用。本次设计的课题是“汽车后视镜的注塑模具设计”。通过对其的工艺性分析，了解其生产技术要求，结合生产的实际环境和制造工艺性等，对其进行了注塑模具设计。包括注塑成型工艺过程、分模面的设计、型腔设计、型芯设计、具体结构设计、零件工艺性分析、标准件的选用。详细介绍了分型面、型腔布置、浇注系统、排气系统、加热、冷却系统、顶出机构、脱模机构以及主要零部件的设计过程。在设计中采用了新的设计思想和新的设计流程，即在整个设计周期内使用使用相同的三维实体模型，以及使用一个基于知识库的三维辅助设计系统，从而降低了成本，缩短生产了周期，提高了生产效率。 关键词：塑料模具；注射成型；模具结构; 模具分析; CAD/CAM/CAE  Plastic Injection Mould Design of a Rearview Mirror of an Automobile Abstract The time，The mould is an important technical equipment in the industrial producing and an important basis in kinds of department’s developing in nation’s economy. Because China’s plastic industry , especially in the aspect of engineering plastic. The plastic mould will develop more rapid than the whole mould industry in our country in the future. With the CAD/CAE/CAM software’s fast developing in intelligence, the plastic work pieces, the mould’s 3D design and its shaping process’ computer aided engineering will play an important role in our country’s plastic mould industry more and more. The subject of this design is “The Plastic Injection Mould Design of a Rearview Mirror of an Automobile”. Analysis the manufacturing-ability for the rearview mirror, realizing its technical specifications and coal the practicality cases of production and manufacture-ability will be done to design the injection plastics mould. The plastic injection mould design includes the injection molding technological process, the parting surface design, the cavity design, the core design, the particular structural des