英文 摘要一堆.docVIP

Spindle?Speed?Selection for?High-Speed?Milling?of Titanium Alloy Curved Surface Jian-wei Ma,?Zhen-yuan Jia,?Fu-ji Wang??Fu-da Ning Journal:?Materials and Manufacturing ProcessesVolume 29, Issue 3, March 2014, pages 364-369 Published online: 4 Mar 2014 The development of high-speed milling technology provides an effective processing method for titanium alloy curved surface with high quality, and the spindle speed is an important machining parameter for the high-speed milling of titanium alloy curved surface. The variation of the geometric features of the titanium alloy curved surface results in the sharp fluctuation of the cutting force as well as the vibration of machine tool, which not only makes a severe impact on the surface machining quality and the tool life but also greatly affects the efficiency of the high-speed milling. An experimental study is carried out to determine the spindle speed for high-speed milling of the titanium alloy curved surface based on the cutting force. The experimental results indicate that in high-speed milling process, the cutting force is associated with the geometric feature of the curved surface and the change of cutting force is relatively smooth when the spindle speed is in the range from 9000 to 13,000 rpm for the machining of titanium alloy curved surface. 高速铣削技术的发展提供了一个有效的处理方法对钛合金曲面与高品质,和主轴转速是一个重要的加工参数的高速铣削钛合金曲面。的变化钛合金曲面的几何特性导致切削力的大幅波动以及机床的振动,这不仅使严重影响表面加工质量和刀具寿命也大大影响高速铣削的效率。一个实验研究确定主轴转速进行高速铣削钛合金的曲面基于切削力。实验结果表明,在高速铣削过程中切削力是与曲面的几何特征和切削力的变化相对平稳时,主轴转速的范围从9000到13000 rpm钛合金曲面的加工。SUPPRESSION OF PERIOD DOUBLING CHATTER IN?HIGH-SPEED?MILLING?BY SPINDLE?SPEEDVARIATION Sébastien Seguy,?Tamás Insperger,?Lionel Arnaud,?Gilles Dessein??Grégoire Peigné Journal:?Machining Science and TechnologyVolume 15, Issue 2, April 2011, pages 153-171 Published online: 25 May 2011 Spindle speed variation is a well known technique to suppress regenerative machine tool vibrations, but it is usually considered to be effective only for low spindle speeds. In