基于PLC的电镀行车自动控制系统设计精要.docVIP

基于PLC的电镀行车自动控制系统设计 摘 要 本设计利用日本欧姆龙PLC CP1E-E40DRPLC来控制整个工作流程的方案。首先对系统的软硬件进行设计，给出系统的工作流程图、硬件接线图、PLC控制I/O端口分配表及整体程序流程图。并以CX-ONE为编程软件设计出电镀行车自动控制系统的梯形图，最后通过仿真实验，实现了电镀行车自动化控制，提高了电镀生产效率，降低了劳动强度。 关键词：PLC，电镀行车，自动控制，组态王  Design of automatic control system of galvanization driving based on PLC ABSTRACT How did the article discuss has carried on the automated galvanization production line control using PLC CP1E-40DR, in this design, we produced the scene from the automatic control technology component in the domestic application prospect and the galvanization production line the environment to consider, take caused this production line truly to have the automatic production movement as the goal, will formulate has used in current and later all applies widespread also can adapt the many kinds of environment programmable controller to control the entire work flow the plan. Has analyzed the system software and hardware design part with emphasis, and gave the system hardware wiring diagram, PLC has controlled the I/O port distribution list as well as the overall program flow diagram , and with STEP7 Micro/WIN32 as the programming software designs has realized the galvanization production automation, reduced the labor intensity. In order to adapt the modern tradition industry control system, we also used based on the system had taken on the position machine. KEY WORDS: PLC, Galvanization Driving, Automatic control, Configuration King目　录 前　言 1 第1章 绪论 2 1.1电镀行车控制系统的概述与选题背景意义 2 1.1.1 电镀行车控制系统的概述 2 1.1.2 课题的选题背景及意义 2 1.2 PLC的发展和历史趋势 3 1.3 PLC的分类 5 1.3.1 按I/O点数分类 5 1.3.2 按功能分类 5 1.4 PLC系统组成及各部分的功能 6 1.5 PLC的基本工作原理 6 1.6控制对象的设计要求 7 第2章 系统的硬件设计 8 2.1 PLC机型选择 8 2.2 I/O分配表及其端子接线图 8 2.3主电路的设计 11 2.4电镀行车的工作流程图 12 第3章 系统的软件设计 13 3.1 软件的组成及作用 13 3.1.1 PLC内部资源 13 3.1.2 PLC编程语言 14 3.2 PLC梯形图设计 16 第4章 组态王软件设计 18 4.1 组态软件 18 4.2 组态王软件设计的步骤 19 第5章 软硬件调试实现 31 结　论 34 谢 辞 35 参考文献 36 附　录 37 外文资料翻译 38  前　言 电镀生产线按照其工艺要求和规模一般设