过程模拟-1 introduction.pptVIP

物性方法 物性方法 * - RYield has no predictive capabilities, yield must be exactly specified. * - Heat of reaction calculation is a new for 9.3 feature. - There is no prediction. Extent or conversion must be specified by the user. - If the stoichiometry of the reactions is specified incorrectly, when the flowsheet is run there will be a mass imbalance error or warning. * * * Start Aspen Plus and go through all of the elements on the main menu: type, models, pull-down menus, mouse-buttons, help line, status line. The cumene flowsheet should be created. This should be done as a guided example or as a