李云龙层框架结构(计算书)详解.doc

河北联合大学轻工学院 QINGGONG COLLEGE, HEBEI UNITED UNIVERSITY 毕业设计说明书 设计（论文）题目：唐山冀唐公司办公楼建筑设计 学生姓名：李云龙 学 号： 专业班级：09q土木6班 学 部：土木工程部 指导教师： 高级工程师 2013年05月20日 摘 要 该工程位于唐山丰南区唐柏路段，地震设防烈度为8度。本工程采用框架结构。该办公楼为四层，层高首层3.6米，标准层3.3米，总高13.95米，总建筑面积为3073.96平方米。该设计包括两部分：建筑设计、结构设计。其中，建筑设计主要是建筑物的平、立、剖面设计；结构设计包括结构构件的布置及构件尺寸的初定，统计荷载，内力计算（横向水平地震作用下内力计算采用D值法，竖向荷载作用下内力计算采用弯矩二次分配法），内力组合，配筋设计，楼梯设计，楼板设计，基础设计等。在设计过程中，计算部分使用手算，绘图部分使用CAD2008、PKPM2010绘图软件。设计成果有设计说明书一份，建筑结构施工图纸共18张。该办公楼采用双向对称布置的内廊式框架结构形式，使用安全。 关键词: 框架结构、建筑设计、结构设计 Abstract This engineering lies in the region of TangShan.The seismic fortification intensity is 8. The type of that structure is frame structure. That building has four stories, 3.6 meters of the first story height， 3.3 meters of the standerd story height; the total story height is 13.6 meters. The construction area of building is 3073.96 square meters. The design procedure consists of two steps: The building design and the structure design . Among them, the building design is mainly to design and draw plan, elevation and section; The structure design contain to design the location of the structure member, and a size of which of beginning settle, statistics the load, measure the internal forces(For example, it adopts D value method with the horizontal frame is subjected to the level earthquake function; It adopts the method of the bending moment distributed two times which is subjected to the vertical load.), combine the internal forces, design the steel reinforcement, design the stairs, design the floor slabs, design the foundation etc. Design in the process, the calculation of hand is used in the part of computer, the painting software of CAD2007、Tarch8.0 and pkpm2010 are used in the part of the paper’s painting. The result of the design contains one of the design manual, and paper of diagram has 18. This building is gathering to the function of official and accommodation. It is beautiful and generous. And