大倾角综采工作面设备选型教程详解.docVIP

山西大同大学 本 科 生 毕 业 设 计 中文题目： 大倾角综采工作面设备选型 英文题目：　 Selection of large dip angle fully-mechanized face equipment 学 院： 姓 名： 学 号： 专 业：机械设计制造及其自动化班 级 指导教师： 职 称： 完成日期： 2014 年 月 日 摘 要 说明书主要针对鹤岗峻德矿大倾角厚煤层综采工作面进行设备选型的探讨。该工作面长度160m，煤层平均厚度11m，倾角35°~40°，年产量35.1万吨，日产2100吨，四六工作制，三班生产，一班检修，每天净提升时间为16小时。依据该工作面地质情况和煤层赋存条件并结合近年来实际生产经验，工作面煤层倾角平均为37°，煤层平均厚度为11m，变化在8~12m之间，该工作面适合采用单一走向长壁采煤，多水平分层开采，全部顶板垮落法管理顶板，进刀方式采用单向割煤，由上向下割煤方式。 作面三机是指采煤机、液压支架、刮板输送机，是整个矿井生产系统的核心，各设备间的合理配套是设备发挥最大的生产潜能的必须条件，这关系到整个矿井能否实现高产高效安全生产。 该说明书涵盖了工作面采煤机、液压支架、刮板输送机的选型以及配套合理性分析。 关键词：综采工作面；采煤机；液压支架；刮板输送机；合理配套 ABSTRACT Manuals aimed primarily at He gang in Jun de mine high inclined fully mechanized face in thick coal seam with discussion on equipment selection. Length in the face 160m, the average thickness of coal seam 11M, angle 35°~40°, annual output of 35.1 million tons, Nissan 2100 Tons of 46 work system, three-shift production, maintenance, net time for every day 16 Hours. Based on the geology and preservative conditions of coal seam face and combined with actual experience in production in recent years, working face coal seam dip angle an average of 37°, average thickness of coal seam 11M, 8~12m between the suitable for single working face in longwall mining, Horizontal slicing, all roof caving law of roof, entry by one-way coal cutting, cutting coal from top to bottom. Three refers to coal mining, hydraulic, scraper conveyor, are the core of the whole mine production system, reasonable matching between the various devices are conditions necessary to maximize the productive potential of equipment, whether this relates to the whole mine realize high production and high efficiency in production. This specification covers the face coal winning machine, hydraulic, selection and matching analysis of rationality of scraper conveyor. Keywords: Fully mechanized working face; The coal mining mach