汽车车身钣金维修要点分析.docVIP

汽车车身钣金维修 摘要：汽车钣金维修是针对汽车碰撞所产生的大小损伤进行修复的工作，即汽车车身修复。车身碰撞损伤恢复程度的好坏，将直接影响到该车修复后的使用性能和安全结构。Automobile body sheet metal repair Abstract: automotive sheet metal repair is the size of damage produced in automotive collision repair work, namely the auto body repair. The degree of recovery of the body collision damage is good or bad, will directly affect the car after the restoration of the performance and safety structure. Repair has vehicle collision accidents are no longer simple automotive sheet metal by hammering, the quality of the repair can not rely solely on the human eye to observe the appearance of the vehicle gap, repair personnel not only to understand the technical parameters and the size of the body, must grasp the body material characteristics, characteristics of stress transfer body deformation and stress points and production trends process the body, such as welding etc.. Based on mastering the knowledge, repair personnel must use the advanced measurement tools, through the three-dimensional measurement of vehicle accurate, the indirect damage deformation judge body directly, make body repair scheme is complete, with the body repair scheme is correct, will return to the car body of the key points to the original location. Keywords: crack; concave doors; measurement; body repair 目录 摘要……………………………………………………………………1 关键词…………………………………………………………………1 1 概述…………………………………………………………………2 2 钣金维修常用工具…………………………………………………2 2.1 常用工具 …………………………………………………………2 2.2 车身修理工具……………………………………………………2 3、对车身数据进行测量及工具的选择使用………………………3 3.1 测量方法……………………………………………………………3 3.2 目测…………………………………………………………………3 3.3 点对点测………………………………………………………………4 3.4 三维测量………………………………………………………………4 3.5该车的损伤程度……………………………………………………… 4 汽车修复技术工艺………………………………………………… 4.1对车身损伤认定的基本方法及该车的损伤程度……………………… 4.2对车身数据进行测量及工具的选择使用……………………………… 4.3根据对事故车的测量和查看确定修复方案……………………………… 4.4 对车身进行拉伸修复及修复方法的分析………………………………… 结论……………………………………………………………………… 参考文献………………………………………………………………… 1、概述 随着汽车技术的发展，汽车的车身结构特别是轿车车身的材料、结构也发生了变化，承载式车身的应用越来越广泛。当车身受到撞击变形后,对车身修复整形要求较高,因为整形