不良描述中英文对照.docVIP

不良描述中英文对照(五金,塑料,PCB) Plastic parts??塑膠部件- Inspection Points /檢查要點 : Abrasion/划痕,Bubbles/气泡, Burrs/毛刺, Bad Plating/電鍍不良, Contamination/雜質, Crack/爆裂, Combine Lines/結合線, Deformation/變形, Flow Marks/流痕, Greasy Dirt/油污, Haze/霧狀, Jelly/泠膠, Mold Marks/模痕, Melange Color/混色,Oppilation Hole/盲孔,Pull White/拉白,Pour Hole uneven/澆口不平,Wrong Stamping/字麥不符, Short Shots/缺料,Shrinkage/縮水, Stripped Screw/螺絲滑牙,Top White/頂白,Weld Lines/夾水紋,Wrong Dimension/尺寸不符 ,Wrong Texture/紋理錯誤,Light/發亮 ;-质量-2. Metal Parts??五金部件Inspection Points /檢查要點 : Abrasion/划痕 , Bad Weld/焊接不良 , Burrs/毛刺 , Bad Plating/電鍍不良 , Bend angle/折彎角度, Contamination/雜質 , Crack/爆裂 , Deformation/變形 , Dents/凹痕 , Greasy Dirt/油污 , Mold Marks/模痕 , Missing Stamp/漏沖壓 , Oppilation Hole/盲孔 , Pressing Marks/壓痕 , Rust/生鏽 , Wrong Stamping/字麥錯誤 , Short Shots/缺料 , Stripped Screw/螺絲滑牙, Pits/疤痕 , Specks/斑點 Wrong Texture/紋理錯誤 , Wrong Dimension/尺寸不符 ;bb3. Painting parts / SilkScreen parts 噴油/絲印部件Inspection Points /檢查要點 : Bleeding/滲色 , Bad Painting/噴油不良 , Contamination/雜質 , deviate position/偏位 , Flow Marks/流痕 , Missing paint/漏噴, Over Paint/肥油 , Pits/疤痕 , Poor Adhesion/附著力差 , Print Words Leans/印刷字體傾斜 , Pooring Paint/薄油, Silkscreen Haze/絲印模糊 , Silkscreen Stamping Inconsistency/絲印字樣不一致 , Scratch/划傷 , Speck/斑點 , Uneven Surface Oil/表面油層不均勻 , Words Break Off/字体斷開 , Wrong Color/錯誤顏色 , Wrong Texture/紋理錯誤 ; 4. PCB 印制线路板 Open/开路; Short/短路; Weave Texture/板料席纹; Foreign Residue/外来杂物; Delamination/爆板,分层; Dent/凹陷; Dent on G/F/金手指凹陷; Scratch/擦花; Misregistration/对位不正; Board Damage/板子损坏; C/M Illegible/白字不清; C/M on pad/白字上垫; Copper expoure/露铜; Solder Mask on Pad/绿油上垫; Uneven Solder Mask/绿油不平均; Solder Mask peeling off/绿油脱落; Missing Hole/漏孔; Excess Hole/多孔; Wrong Hole Size/孔径错误; Hole Breakout/崩孔; Nick Trace/线路缺口; Void on Trace/线路铜穿; Diskdown/线路不良/狗牙; Solder Mask inside hole/绿油入孔; Discolouration under Solder Mask/绿油颜色不良; Foreign matter under Solder Mask/绿油下杂物; Solder Mask skipping/不过油; Solder on Gold Finger/金手指上锡;