喷涂旋喷RoboBell925要点.pptVIP

ROBOBEL925 Entire components of ROBOBEL925 Dimension of ROBOBEL925 Valve organize Valve organize Valve organize Valve organize Paint loss of color change Paint system of RB925WTD Paint system of RB925MC Fitting of Rear Plate (MCCV) Bell Cup, Shaping Air Ring Probe ＭＧＰからの出力は色数（最大７色） * ABB K.K. ATMA-ASU Small and Light-weight A 120-degree L-shaped construction allows for optimum robot painting not only in car body external surfaces but also in other objects. Highly durable and stable rotation by double turbine air bearing motor. Preset flow rate is maintained by rotation speed monitoring and feedback control by ABB’s rotation controller so as to ensure consistent painting operation irrespective of air rate variations. Paint and air tubes are housed in the robot arm to avoid inadvertent breakage and fluid contamination due to multiple robot motion. Features of ROBOBEL925　1 High voltage controller and rotation controllers are placed in the exclusive cabinets respectively. Atomizer may be removed from the robot arm by loosening the cover nut with the unique tools. No insulator is required for metallic paint supply system; i.e., metallic paint is handled in the same manner as for solid coat. User can select a combination of Bell Cup and SA Ring depending on painting conditions. Trigger, dump, nose flush, gate and eight paint valves built in the atomizer can be selected for application. Air motor and cascade are made up of cartridges for ease of maintenance. Features of ROBOBEL925　2 Painting Performance ofROBOBEL925 Metallic Finishing Capability (METABELL) High Transfer Efficiency Enhanced Atomizing Capability Excellent Fine Atomization by Unique Bell Cup with Serration Equal Droplet Distribution of Spray Pattern Easy-to-change Spray Pattern Size by changing bell cup with SA ring Self-cleaning Bell Protection of ROBOBEL925 By monitoring High Voltage Limits, High Voltage Current Limits and High Voltage Current Surge within Sampling Time (Slope Current) with micro com