kv及kV变电站设计毕业论文(级)讲述.doc

本科生毕业设计（论文） 题 目： 220kV变电站设计（220kV及10kV初步设计） 姓 名： 学 院： 电气工程与自动化 专 业： 电气工程与自动化 年 级： 校内指导教师： （签名） 校外指导教师： （签名） 2015 年 06 月 15 日 学生姓名 年 级 2011 学 号 所在学院 电气工程与自动化学院 所学专业 电气工程与自动化 毕业设计（论文）题目 中文：220kV变电站设计（220kV及10kV初步设计） 外文：220 kv substation design (220 kv and 10 kv preliminary design) 学生承诺 我承诺在毕业设计（论文）活动中遵守学校有关规定，恪守学术规范，在本人的毕业设计（论文）中未剽窃他人的学术观点、思想和果剽窃他人的学术观点、思想和果esign of electrical part of 220kV substation - 220 kV and 10 kV preliminary design abstract With the development of the Times、the progress of science and technology, substation technology development is becoming mature, substation automation system as well as measurement monitoring system are gradually popularization and application in practice.Under the background of new era, substation automation, intelligent substation is the trend of The Times.Therefore, substation scientific and reasonable design also become more and more important. In this paper, according to the design plan descriptions of the substation and the consideration of the current main technology used in substation operation,combined with the required computational load, and based on the needs of the forward, to determine the transformer sets, capacity and type.At the same time, this article according to the short circuit current calculation to verify the choice of a device, it also made some instructions for electrical once part of the equipment , and designed out of the 220 kV substation electrical equipment configuration scheme.The substation design mainly includes two parts, the first one is the calculation of short-circuit current, setting main wiring schemes, an equipment selection and calibration, including the main transformer, circuit breaker, transformer, etc.Through economic and technical validation to determine the best way of mai