空客公司抗腐蚀钢的钝化流程规范AIPS汇编.docxVIP

Airbus Process Specification Passivation of Corrosion Resistant Steel Published and distributed by : AIRBUS S.A.S. ENGINEERING DIRECTORATE 31707 BLAGNAC Cedex FRANCE Copyright reserved Ref. no. AIPS02-05-005空客公司抗腐蚀钢的钝化流程规范 出版、发行:空客工程指挥部31707 BLAGNAC Cedex法国 著作权所有 参考编号。AIPS02 - 05 - 005Contents 1 Scope 2 Normative references 3 Definition, applicability and limitations 4 Engineering requirements 5 Technical qualification 6 First part qualification 7 Series production inspection 8 Rework 9 Environment, health and safety内容 1范围 2引用标准 3定义、适用性和局限性 4工程需求 5技术资格 6第一部分资格 7系列的生产检验 8返工 9环境、健康和安全 1 Scope This Airbus Process Specification defines the Engineering requirements for Passivation of Corrosion Resistant Steel . This specification does not give detailed instructions; these are given in the Process Instructions (PI) / Airbus Process Instruction (AIPI) and the Work Instructions. This specification shall not be used as an inspection document. It shall be applied when mentioned in the relevant standard, material specification or Definition Dossier. 2 Normative references Only normative references cited in the text are listed hereafter. The latest issue of the publication referenced shall be used. AIMS 09-00-003Water Quality. AIPS 04-03-001Heat treatment of steels. EN 2832 Hydrogen embrittlement of steels – Notched specimen test. ASTMF519 Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments. EN 6072 Constant amplitude fatigue testing. EN 10020Definition and classification of grades of steel ISO 1463 Metallic and oxide coatings - Measurement of coating thickness: Microscopic method. ISO 2409 Paints and Varnishes - Cross-cut test ISO 2812 Paints and Varnishes - Determination of resistance to liquids - Part 2: Water immersion method ISO 4287GPS - Surface Texture: Profile method ISO 6270 Paints and varnishes – Determination of resistance to humidity – Part 2: Procedure for exposin