DRV21201变频器基础研讨.pptVIP

* This drive is like the PowerFlex 4 with the following additions: It offers sensorless vector motor control, which provides “good” low speed torque performance for middle of the road 应用s like conveyors It offers a higher power range It offers an internal place for communications modules PID control allows control of process variables (e.g. flow, pressure, tension) within the drive 步序逻辑 is a allows the drive to cycle through eight steps or states in a profile * This drive is like the PowerFlex 4 with the following additions: It offers sensorless vector motor control, which provides “good” low speed torque performance for middle of the road 应用s like conveyors It offers a higher power range It offers an internal place for communications modules PID control allows control of process variables (e.g. flow, pressure, tension) within the drive 步序逻辑 is a allows the drive to cycle through eight steps or states in a profile * This drive is like the PowerFlex 40 with the following additions: Optional encoder feedback for speed or position control Optional DriveGuard for providing protection against restart according to EN954-1 Ability to control the position of the motor (not just speed) * * * * PowerFlex 40, 40P and 400 drives can house communication adapters PowerFlex 4 and 4M drives can connect to communications adapters via a 22-XCOMM-DC-BASE * * * * * * * * * * * * There are two main programming tools for Component Class drives DriveExplorer is a basic and intuitive tool, which comes in three versions DriveTools is suit of two programs DriveExecutive is a online / offline configuration tool that uses RSLinx (Just like RSLogix and RSNetWorx) for connectivity DriveObserver is a plotting and sampling tool that allows you to produce digital plots of parameter data like a chart recorder (it also uses RSLinx for connectivity) * The Lite version of DriveExplorer is free It doe not have all the 特征 of the full version * DriveExecutive is available in two versions (full and Lite) *