竖笛尾段的注射模机械CAD图纸设计.doc

摘 要 随着近代工业的发展，塑料的应用日趋广泛，从而使之相适应的塑料制造业蓬勃兴起。模具已是工业生产的主要工艺装备，模具工业已国民经济的基础工业。根据日常生活的需要， Abstract With the development of modern industry, the plastic is used more and more widely, which causes the plastic manufacturing industry to adapt to the booming. The mold has been the main process equipment in industrial production, the mold industry has gradually become the basic industry of national economy. According to the need of daily life, the topic of this design is. First introduced the new technology present situation, development trend and China plastic mould plastic mold development in our country, then around the die clarinet tail section is designed, its main content includes: according to the structural features of the product, determining the number, cavity mould parting surface and demoulding mechanism. The choice of gating system and cooling system rationally. Analysis and design of injection molding process, make the molding process is reasonable, the correct selection of injection molding equipment. And then check the mold design manual, selection of formwork, determined structure size of mold, to complete the overall design of the die. At the same time, make full use of the computer drawing software to design parts, forming a complete set of CAD drawings. Three-dimensional modeling of parts with Pro/E, and the realization of three-dimensional assembly parts. Finally, describes the manufacturing of plastic mold: machining main processing method of production process, tooling and mold, and the typical machining process were analyzed and the production of injection molding process. Through this design, have a better understanding of the whole process of mold design. Keywords: injection mold; plastic; Clarinet tail section; mechanical processing; pouring system 目 录 1 引言 1 1.1 塑料模具的现代及发展 1 1.2 塑料注塑模具的设计步骤 5 1.3 课题任务要求 7 2 方案分析与设计 8 3 竖笛尾段的详细设计 10 3.1 塑料注塑成型机的选择 10 3.2 注射模具分型面的选择 13 3.3 模具结构设计 13 3.4 注射模具浇注系统的设计 14 3.5 塑料注射模具的温度调节系统设计 19 3.6 注射