凸轮连杆机构冲击实验测试装置机械CAD图纸设计.doc

摘 要 印刷机是一种典型的精密轻工机械，其内部有很多机构从动件系统驱动，机构运行的动态特性的好坏直接影响设备的性能在机高速运转，会发生冲击振动，这也会影响其特性。核心在于设计一种凸轮连杆机构冲击实验模型，测试凸轮连杆机构运动过程中相关动力学参数，减速电机通过带传动使得凸轮，使从动件做既定规律的运动，软件仿真得到数据其进行主要下内容的方案设计零部件的结构设计，编制程序进行凸轮轮廓曲线的设计以及运动分析的程序机构零件图以及装配图的绘制三维建立dams软件仿真对仿真进行分析的可行性 本课题最终通过研究设计出了一凸轮连杆机构冲击实验测试装置，对高速凸轮动态特性研究具有一定的意义。：连杆机构dams  ABSTRACT Printing machine is a kind of accurate light industry machine, and a lot of the key mechanism is drive by cam-follower-system, and the dynamic characteristic of them can direct influence the function of the mechanism. When the machine is running in a high speed, the cam-follower-system could produce the vibrabration and impact, and this can influence the dynamic characteristics. The design of impact test model for high-speed cam-follower-system and the simulation by Adams. The issue lies in to make a design of cam-follower-impact-test machine, the machine is to test the dynamic-data of cam-follower system, and by a gear motor by way of belt drive makes the cam rotation, to make the follower to do the regular motion, and by sensor to collect the experimental data and to analyze the data. The thesis should complete the following content: first, design the scheme for the model. Second, complete the calculate and the design of mechanism and structure. Third, draw the part drawing and the assembly drawing of the mechanism. Last simulate by Adams software and compare the data with the data come from matlab. The issue design a new cam-follower-impact-machine by investigation, it can provide some sense for the research of cam dynamic characristics. Keywords: Cam-follower system Dynamic Test machine Solidworks Adams  目 录 1 绪论 1 1.1研究背景 1 1.2国内外研究现状 2 1.3本论文研究的主要内容 2 2 总体方案的选择和结构设计 3 2.1 总体方案设计 3 2.2凸轮机构的设计 4 2.3支架设计 11 2.4传动方案设计 12 2.5连杆机构的设计 13 2.5.1连杆机构主体设计 13 2.5.2其他部分的设计 15 2.6冲击装置的设计 19 2.7 轴的计算校核 20 3 实验模型的三维建模及仿真 22 3.1 Solidworks三维建模 22 3.2 Adams仿真及结果分析 24 4 总结与展望 29 4.1总结 29 4.2展望 29 参考文献 30 致 谢 31  1 绪论 1.1研究背景属于典型的精密、复杂的机械产品，其速度精度取决于成百上千内部互联和的部