大型制药厂热电冷三联供机械CAD图纸设计.doc

XX大学 20**届 毕 业 设 计（论 文） 题目：大型制药厂热电冷三联供工程设计研究 班 级： 学 号： 姓 名： 指导教师： 20** 年 6 月 大型制药厂热电冷三联供工程设计研究 Electricity Heat and Chilled Water Congenerating System in large-scale pharmaceutical factory is provided in the engineering design research. Abstract: Combined heat and power(CHP) systems often use absorption technology to supply heating and cooling to a facility.This paper puts forward an energy comprehensive utilization system, Electricity Heat and Chilled Water Congenerating System(EHCWCS).This system introduces H2O-LiBr Absorption Refrigenerating Machine into Heat and Power Plant to increase the heat load of the plant in summer,which can balance the heat load in summer and winter, so Heat and Power Plant can run in a high efficiency. This text is according to the thermo-electricity cold triple-generation system provide the principle that economize the energy, proceeding to a large pharmaceutical factory the engineering design study, joining together the pharmaceutical factory to the temperature, the degree of humidity requests the high characteristics, proceeding the detailed calculation, carry on detailed calculation, put forward the request to the refrigeration equipments in system parameter. The result of analysis states that this system can not only save energy, but also increase the output of electricity of Heat and Power Plant and protect environment. Theme words: electricity heat and chilled water congenerating; absorption; ervironmental protection 目录 第一章 绪论…………………………………………………………1 第二章 工程概述……………………………………………………2 第三章 设计参数……………………………………………………3 第一节 室外设计参数……………………………………………3 第二节 室内设计参数……………………………………………3 第四章 负荷计算……………………………………………………4 第一节 冷负荷计算………………………………………………4 第二节 热负荷计算………………………………………………8 第五章 空调方案的选择及空气处理过程的确定…………10 第一节 空调房间送风量和送风状态参数的确定……………10 第二节 空调方案的选择………………………………………12 第六章 空气风系统设计及气流组织计算…………………14 第七章 方案比较…………………………………………………17 第八章 空调水系统设计…………………………………………18 第九章 设备选型及安装…………………………………………20 第十章 空气风系统设计及气流组织计算…………