多向固定支架冷冲压工艺及级进模毕业机械CAD图纸设计论文.doc

摘 要 关键词：多向固定支架；冲压工艺；排样；级进模 Abstract The die used to cut waste by punching, punching die structure, guide, bending, cutting process design, arranged in a single row of horizontal nesting. And dress design the die structure die mounted on the lower die part, to die with floating and equipped with a small internal guide post. First order to properly control the feeding step away from the unilateral side of the blade fixed pitch in the main location pilots to precise positioning. The faster the material is thin, stamping, elastic Stripper Stripper structure, it is recommended that an elas