南京工业大学施工组织设计毕业论文讲课.doc

南京工业大学本科生毕业设计(论文)  PAGE \* MERGEFORMAT   PAGE \* MERGEFORMAT I 南京工业大学毕业设计 宿迁科技城标准厂房 施 工 组 织 设 计 年 月  宿迁科技城标准厂房6.7#楼施工组织设计 摘 要 施工组织设计是建筑施工组织的核心和灵魂，是对工程建设项目全过程的构思设想和具体安排，用来指导施工项目全过程各项活动的技术、经济和组织的综合性文件。 本工程为宿迁科技城标准厂房6.7#楼，建设地点位于宿迁市开发大道路南侧，漓江路东侧、建设单位为江苏宿豫经济开发区开发投资有限公司、监理单位为江苏永勤工程管理有限公司、设计单位为上海都市建筑设计有限公司。结构类型为框架结构、建筑层数：四层，建筑面积：约21370.80万平方米。 本施工组织设计是针对宿迁科技城标准厂房6.7#楼工程施工的纲领性文件。设计包括主要以下内容：工程概况、施工准备、施工方案、施工进度计划、资源需用量计划、施工现场平面布置、主要施工控制及保证措施、主要技术经济指标分析、技术档案资料管理及工程质量回访、保修等。 关键词：设计 施工组织 工程 计划摘要 南京工业大学本科生毕业设计(论文) Suqian city of science and technology standard factory building6.7 # building construction organization design Abstract Construction organization design is the core and soul of the construction organization, is for the whole process of engineering construction project design ideas and specific arrangement, used to guide the construction project whole process activities of technical, economic and organizational comprehensive document. The project of suqian city of science and technology standard factory building 6.7 # floor, the construction site is located in suqian development road south, li river road on the east side, the construction unit for two districts in jiangsu province economic development zone development investment co., LTD, supervision unit designed for jiangsu Mr Engineering management co., LTD., unit for Shanghai urban construction design co., LTD. Structure type for the frame structure, architectural layers: four floors, building area: 213.708 million square meters. The construction organization design is aimed at suqian city of science and technology standard factory building 6.7 # building engineering construction of the programmatic document. Design includes mainly the following content: the project general situation, construction preparation, construction scheme, construction progress plan, resources to the dosage plan, the construction site layout, main construc