钢结构换新原则工艺.docVIP

Page  PAGE 4 of  NUMPAGES 4 钢结构换新原则工艺 一、换板位置：LOCATION OF STEEL RENEWAL： 具体位置见施工图纸或现场标记。 DETAILED LOCATION TO BE DECIDED BY REPAIR DRAWING OR MARKING ON SPOT. 二、换板材质和板厚:REPLACED MATERIAL AND THICKNESS 1．换新材质和板厚应与原材质及原板厚相同，或根据船东、船检要求换新。 THE NEW STEEL PLATE THICKNESS AND GRADE TO BE SAME AS ORIGINAL OR APPROVED BY BOTH OWNER AND CLASS SOCIETY . 三、切割及装配原则:CUTTING AND FITTING PROCEDURE: 1.为防止变形发生,外板、外底板、内底板、主甲板、纵壁、横壁，大面积换新时必须分区、分批进行, 纵骨、外板肋骨大面积换新必须隔一去一的进行。 IN ORDER TO AVOID DEFORMATION，IF LARGE NUMBERS OF SIDE SHELL PLATE、BOTTOM PLATE、 INNER BOTT