SHRP实验原理与弯曲流变仪(DSR)使用方法.pptVIP

shear strain is normally abbreviated to strain dimensionless use % strain or millistrain terms it is quoted because it is independent of geometry The rate of change of STRAIN is known as the shear strain rate or SHEAR RATE. Since strain has no units, the shear rate has units of reciprocal seconds s-1 . SI, 国际单位制 CGS， 物理单位制, centimetre-gram-second system 4.2 测试程序目的及释义 SHRP标准测试程序意义： 1. Original Binder（原样沥青单点测试实验） 用于检测64℃下，原样沥青的车辙因子是否符合标准（G*/sin δ 1kPa即符合64℃标准）。 2. Original Binder Grade（原样沥青等级区分实验） 用于鉴定原样沥青的品质等级，首先在64℃测试材料的车辙因子，与1kPa比较，然后系统将自动进入下一温度（比上一温度高6℃或低6℃）进行测试，直至材料的等级得以确定。 3. Origin