04、FLOW_3D V11网格划分.ppt

* * * * * * * * * * * * * * * * * * * * * * * * * * * * DISPLAY –显示结果 FLOW-3D功能列表说明 Meshing Geometry 在Meshing Geometry字段下，有一整排的工具栏可以调整显示方法。以下将针对常用工具进行个别功能进行说明。 Tools 图输出 旋转轴 显示所有对象 ADMesh 选项 Tools / Take a snapshot 输出图片，可储存成三个格式（bmp, jpeg与png） Tools / Axis rotation 左下角的转轮，除了可以针对X,Y,Z三轴旋转外，最常用的功能在于可以直接『key in』旋转角度。 Tools / Show all objects FLOW-3D V10可任意隐藏单一对象（包含CAD图档与网格图档。隐藏后如果不想一个一个慢慢开启，可以执行『Show all objects』（Ctrl-A）显示所有的对象。 Tools / Options Tools Options下总共可控制三个显示 Color：所有的颜色显示，包含了背景、前景、固体颜色…等。 Light/camerasetting：可设定灯光与录像模式的位置（一般而言仅有录像模式可能会使用到） 3D GraphicFont：调整后处理字体的大小与显示方式 * FAVOR checking has been added to help users determine if there mesh is adequate enough to capture geometry features (these may include the flow if they are cavities. Keep in mind that if you are not interested in fully capturing a region then you can ignore the errors within that region. An Error tolerance bar is available to help hide FAVOR problems in regions that are not of interest. The value is a ratio * Here is an example of a missed hole. By right-clicking on the cube and slicing along a direction you can get a better view of the problem. As can be seen here there are multiple surfaces crossing along a mesh plane that are not being captured. Some features may not be important to capture and if you following the meshing guidelines you will not have to use to this option. This option also works with Renderspace. Renderspace is another FAVOR option that allows the user to define a rectangular space with a cell size in order to get an idea of what size is necessary before actually meshing. * Cartesian mesh can be used for flow domain, conforming mesh blocks, and hexahedron. The hexadedron mesh uses the cartesian mesh and then conforms to solid but moving the nodes to solid and also converging it necessary. Hexahedron mesh can be used with conforming mesh blocks for FSI and TSE model. * * This is the same case, but now the conforming mesh is only built around solid component 1: the