3.智能防火防盗报警系统设计.docxVIP

二 ○ 一 六 届 毕 业 设 计智能防火防盗报警系统设计学 院：电子与控制工程学院专 业：自动化（轨道交通）姓 名：闫韬宇学 号：201232010513指导教师：许唐雯完成时间：2016.6.1二〇一六年七月摘 要 伴随国民经济和科技发展，给安防领域带来了新的挑战，同时也极大的刺激了智能防盗防火系统的发展，人民对生活环境安全的要求以及从生存向多方面智能化，、多功能化的方向过渡。本次系统设计为智能防火防盗报警系统。本系统以单片机为核心，传感器为辅助。具有自动检测防火防盗的功能，本系统使用TI公司msp系列单片机，传感器使用红外传感器进行盗情检测，使用烟雾传感器、火焰传感器和温湿度传感器对火情进行检测。当传感器模块发现火情和盗情时，将信号输出到单片机，单片机处理报警。多类传感器联合使用，增加了整套系统的可靠性。本系统使用低成本的单片机和传感器，对实际生活中防火防盗系统进行模拟，对以后的研究有很大的指导作用。本次系统设计使用美国德州仪器公司生产的msp430f5529单片机，HC-SR501红外传感器模块，MQ-7烟雾传感器模块，火焰传感器模块和DHT11 温湿度模块。本次设计的系统性价比高，并具有一定的实用性。关键字：防火防盗报警，msp4305529，MQ-7，DHT11ABSTRACT With the national economy and the development of science and technology, to the field of security brought new challenges, also greatly stimulated the development of the intelligent fire alarm system, the requirement of people to a safe living environment and from survival to more intelligent, multi-functional direction of the transition.The system design for intelligent fire alarm system. This system takes the MCU as the core, and the sensor is the assistant. With function of automatic detection of fire alarm, the system uses Ti MSP Series MCU, sensors are used infrared sensors were stolen sentiment detection, using smoke sensor, flame sensor and a temperature and humidity sensor for fire detection. When the sensor module of fire and theft, and outputs the signal to the microcontroller, MCU alarm. The combined use of multiple types of sensors increases the reliability of the whole system.This system uses the low cost single chip microcomputer and the sensor, carries on the simulation to the real life fire prevention and guard against theft system, has the very big instruction function to the later research.This system design uses the United States of the United States, the production of msp430f5529 microcontroller HC-SR501, infrared sensor module, MQ-7 smoke sensor module, flame sensor module and DHT11 temperature and humidity module. The design of the system cost-effective, and has a certain practicality. KEY WORDS：fire