Machiningthe Machining the ngv assembly(1航空涡轮发动机 英文版).docVIP

Machining the Machining the ngv assembly加工的加工组装NGV To ensure concentricity,the ngv assembly should all be machined in one setting. Use the plywood faced faceplate used earlier and bore a hole to a snug fit with the welded vane of the ngv. Hopefully you will find your original attaching screw holes still line up and the turbine shroud will run true, If not, your objective is to make the turbine shroud run as true as you can! 为了保证同心度，对NGV组装都应加工于一体的设置。使用前面所用的夹板面临面板和钻孔的紧密贴合与NGV的焊接风向标。但愿你会发现你原来的安装螺钉孔依然排队涡轮护罩将一如既往，如果没有，你的目标是使涡轮护罩运行为真，你可以！ When done and held secure,the turbine shroud should be skim