SPEC.docVIP

Signal Source的工艺参数规格 Document # CMSS-1414-091 Author Frank Fang Revision K Owner MPG Operation This is a confidential documentThis document and the information herein is the property of RFMD and is issued in strict confidence. Do not reproduce it, copy it, or give it to a third party without express permission from RFMD. E-mail DocumentControl@ for more information. Contents/内容 Cmss-1414-091 1 1 purpose（目的） 2 2 scope（范围） 2 3 references（参考） 2 4 definitions（定义） 2 5 responsibility（职责） 2 6 equipment（设备） 3 7 materials（材料） 3 8 safety（安全） 3 9 Specifications （参数规格） 3 10 records（记录） 3 11 Revision history（再版记录） 3 Revision KSee (0 for Revision History. Add Heraeus solder paste Define 18~25℃ as room temperature Delete stencil specifications which with design characteristics Modify squeegee specification Add profile specification of Heraeus paste Add new UV tape and Dicing blade Part NO. Updated solder dispensing SPEC. Change the value SPEC of UV power. Change cover attach reflow oven O2 PPM SPEC Revised by JD Zhang, Jul..15/2011 purpose（目的） This document details the process specifications about Signal Source in RFMD Beijing MPG operation. 此文件描述RFMD北京MPG 运作部的信号源生产工艺参数规格。 scope（范围） This document applies to the Signal Source in RFMD Beijing. 本文件适用于RFMD北京信号源生产工序。 references（参考） CMSS-1414-090 MPG Assembly defect Criteria RFMD, CHINA CMSS-1414-091 Signal Source process specification SAF-01-1006C RFMD Safety manual Emergency procedures Handbook CPSS-1415-06 Signal source process Control Plan, RFMD China FMSS-1416-06 SS process FMEA, RFMD China CMAMP-151-001 MPG Assembly Non-confirming product and Material Control Procedure CPA-141-033 Assembly SPC Instruction CQA-141-003 Assembly Quality Control Procedure CQA-093-004 Discrepant Material Report (DMR) Procedure CMSS-1414-099 MPG assembly Sten