过程装备与控制工程业英语翻译5.docVIP

Reading Material 5 Static and Dynamic Balance of Rotating Bodies The unbalance of a single disk can detected by allowing the disk to rotate on its axle between two parallel knife-edges, as shown in Fig.1.22. The disk will rotate and come to rest with the heavy side on the bottom. This type of unbalance is called static unbalance, since it can be detected by static means. In general, the mass of a rotor is distributed along the shaft such as in a motor armature or an automobile-engine crankshaft. A test similar to the one above many indicate that such parts are in static balance, but the sys