F7 连线指南新—中英繁.docVIP

F7 Quick Connection Guide Connection between F7 terminal and power supply F7 terminal is shown in above figure. It supports DC power supply of 9-15V as input, and can work immediately through the direct connection between GND and ＋12V . If lock-control uses the individual power supply, the current of F7’s power supply adapter applies matching current of 500mA or over; if lock-control uses the same power supply with F7, the nominal output current of the power adapter will exceed the working current by over 1000mA. GND GND +12V Power RS232 RXD Lock COM RS232 TXD Lock NO GND Lock NC