第二章材料作业.docVIP

1．Choose the correct answer 1 . Which is the requirement of properties for welded load-carrying structural steel A. yield strength, elongation B. tensile strength, yield strength, elongation C. tensile strength, yield strength, elongation, impact toughness D. tensile strength, yield strength, elongation, cold-forming property 2 . Which kind of steel are recommended by the Code GB50017-2003 for design of steel structures A. No. 3 steel, 16Mn、15MnVN B. HPB235、HRB335 、HRB400、RRB400 C.Q235、Q345、Q390、Q420 D. Q235、Q345、Q390 relationship between and of the same steel. A. always B. always C. usually ＝ D. can not compare 4 . After cold work hardening, the ductility and toughness of steel will decrease, and the yield stress will A. decrease B. unchanged C. increase D. depend on 5 .According to the Code GB/T 700-2006 for carbon structural steel, the quality of the carbon structural steel divide into grade A、 B、 CD. The strictest one in the quality is A. grade A B. grade B C. grade C D. grade D 6 .Which is correct in the following sentence A．the smaller the thickness is, the higher the design strength is. B．he more carbon content is, the better weldability is. C．he more carbon content is, the better plastic deformation is. D．has beneficial effects on the stress state of component. 7 .The elongation of steel reflect the steel’s A. loading capacity B. elastic deformation capacity C. plastic deformation capacity D. resisting impact load capacity 8 . The design value of shear strength of steel is related to , . A． B． C． D．.The more severe stress concentration is, the steel will become more and more crisp, it is because . A. stress concentration reduce the yield point of steel B. stress concentration produce the stress field of same symbol, so that the plastic deformation is limited C. stress of stress concentration is higher than the average stress D. stress concentration decrease the tensile strength of steel 10 . When the temperature drops from room temp