模拟电子技术课程设实验报告.docVIP

模拟电子技术课程设计 计算机科学与技术系 12网络工程(2)本 姓名:郭能 学号:51202032019 课题:OTL功率放大器 设计任务书 应用意义 音频功率放大器是音响系统中不可缺少的重要部分，其主要任务是将音频信号放大到足以推动外接负载，如扬声器、音响等。功率放大器的主要要求是获得不失真或较小失真的输出功率，讨论的主要指标是输出功率、电源提供的功率。本课题主要设计一个OCL功率放大器，来满足设计要求。OCL功率放大器即为无输出电容功率放大器。采用两组电源供电，使用了正负电源，在电压不太高的情况下，也能获得比较大的输出功率，省去了输出端的耦合电容。使放大器低频特性得到扩展。OC性能比较好，所以广泛地应用在高保真扩音设备中。OTL功率放大器，它具有非线性失真小，频率响应宽，电路性能指标较高等优点，也是目前OTL电路在各种高保真放大器应用电路中较为广泛采用的电路之一。 在实验过程中输出信号往往会产生较大的失真，对此我调解了电阻的阻值，经过多次调解输出波形的失真度渐渐减小；同时还应更改二极管的型号以及三极管的型号已达到减小失真度的目的。最好是事先通过合理的计算得出各个电阻的大小以及各个二极管和三极管的型号，这样会使用仿真软件仿真的时候会方便快捷的多。在焊接电路板时往往会和电路图不一样，由于平时一直都在看电路图，对电路板接触较少，不能及时转换思维，造成焊接时错误频繁发生。对此我多次试验，积极分析，把电路图与电路板有效的联系起来，最终发现电路图和电路板其实是一样的。不过在焊接电路板时把电路图中的元件符号换成实际的原件而已。 In order to ensure normal teaching order, protecting students healthy growth, ensuring that national (property) is not lost, to prevent or minimize the occurrence of safety accidents, follow the prevent, rescue each other, ensure safety and reduce losses principle, according to the local conditions, make the management system. 1, the principal is the responsibility of school safety, school security under the leadership of President security work leading group. The head teacher to the leadership team is responsible for, implementation of the accountability system. 2, school monthly student knowledge about safety education, education should be diversified in the form every safety education for students of classes per week should be targeted. To carry on emergency issues dealing with education in General, self-help and mutual rescue knowledge. Emergency calls (such as 110, 119, 122, 120, and so on) use common sense in education. 3, the establishment of major accident reporting system. School students report major accident within an hour of education; student run and disappearances to report; report of the accident to a written report in triplicate, a correctional centre, a police station, a township peoples Government shall not conceal the accident. 4 week, teachers are on duty system, es