组态论文.doc

MCGS组态软件课程设计 题 目： 自动供水系统 姓 名： 王亮 学 号： P081613326 学 院： 电气工程学院 专业班级： 08级电气一班 指导教师： 王彩霞 同 组 人： 孙增成、王水峰、李小婉 西北民族大学 2011 年 6 月 21 日 目录 1.绪论 3 1.1课题背景 3 1.2设计思路 3 2.基于MCGS组态软件的系统设计 4 2.1建立主窗口文件 4 2.1.1建立用户窗口 4 2.1.2确定实时数据库 4 2.1.3系统界面设计 5 2.2运行策略 7 2.2.1循环策略 7 2.2.2数据显示 9 2.2.3 调节曲线 12 2.2.4 报警数据 13 2.2.5 封面 14 3.结论 15 参考文献 16 附 录I 17 运行程序 18 自动供水系统 专业： 08电气1班 姓名：王亮 指导教师：王彩霞老师 摘 要自动供水PID调节ABSTRACT Along with the rapid development of social economy, and water on peoples lives and industrial production influence strengthened day by day, to the quality of peoples water supply and water supply system reliability requirement enhances unceasingly. The advanced automation technology, control, communication and network technology application domain, become to the water supply for the water supply system design for the new requirement is life in the water and design of the residents. MCGS software application, the pressure sensor, PID regulator composition control system, adjust the water pump output flow. Design used in three pump, a pressure sensor, according to the water supply system to control the flow of water pressure and export water pump switch, so the system in the most reasonable position, make sure on-demand water supply. By using this system can improve water supply water supply system of stability and reliability, convenience to realize the centralized management of the water supply system and monitoring; And the system has good effect of energy saving in energy, it is particularly important to the growing shortage today, so the design of the system to improve the enterprise efficiency and peoples living level, reduce the energy consumption in has the important practical significance. Key Words：Automatic water supply ，PID adjustment0” “窗口1” “窗口2” “窗口3” “窗口4”。 (2)选中“窗