基于Moldflo手机后盖模具优化设计.docVIP

基于Moldflow手机后盖模具优化设计 摘要 精密塑件。本设计塑设计，对零件结构进行了工艺分析。分型面选择了注射机，成型零部件的尺寸采用浇口利用直导柱导向，杆顶料,顶完成脱模并模具的材料进行了选择如此设计出的结构可确保模具工作运可靠,对模具结构与注射机的匹配进行了校核。 关键词：注塑，模具，MOLDFLOW。 Abstract： Injection molding is one of the key ways of thermoplasticity plastic molding which can mold precise plastic part with complex shape. The design is a plastic mould design of the back over of mobile, which analysis part structural with PC+ABS as the material of plastic part. First, using MOLDFLOW software products for mold flow analysis, primarily in the gate position to optimize and to select the best gate location,