STC单片机ADC验证过的程序.docVIP

/*STC90C58AD单片机电压测试,595驱动4段共阴数码管显示 //测试点P1.7，被测对象，LM2596_ADJ，误差+0.02V /* If you want to use the program or the program referenced in the */ /* article, please specify in which data and procedures from FLY2038*/ /* FROM:FLY2038 DATA:2014-4-23 QQ:座机电话号码25 */ #include stc90c58ad.h #define uint unsigned int #define uchar unsigned char sfr ADC_CONTR 0xC5; sfr ADC_RES 0xC6; sfr ADC_LOW2 0xC7; sfr P1_ADC_EN 0x97; sbit SH P1^0;//数码管段码由74HC595驱动 sbit ST P1^1; sbit DS P1^2; sbit DA P1^6;//数码管位码 sbit DB P1^3;//数码管位码 sbit DC P1^4;//数码管位码 sbit DD P1^5;//数码管位码 uchar sum[4]; uchar code table[] 0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f ; uchar code table1[] 0xbf,0x86,0xdb,0xcf,0xe6,0xed ; float temp 0; uint j 0; uint temp1 0; float k 0; void send595 uchar temp ; void delayms uint z uint x,y; for x z;x 0;x-- for y 110;y 0;y-- ; void ADC_Init ; uint conversion ; void exchange float i ; void dis595 ; void main ADC_Init ; while 1 conversion ; exchange temp ; dis595 ; void ADC_Init //ADC 初始化 P1_ADC_EN 0x80; //P1.7使能 ADC_RES 0; // ADC_LOW2 0; //清零 ADC_CONTR 0x60; //ADC转换速度控制 uint conversion ADC_CONTR| 0x0f; delayms 1 ; while ! ADC_CONTR0x10 ;//等待ADC_FLAG 1； ADC_CONTR 0xe7;//ADC_FLAG.ADC_START清零 temp 5.1* ADC_RES*4 +ADC_LOW2 /1023; return temp; void exchange float i j++; k+ i; if j 49 k k/50;//测试50次取平均值 temp1 k*1000;//小数点后三位有效 sum[0] temp1/1000; sum[1] temp1%1000/100; sum[2] temp1%100/10; sum[3] temp1%10; j 0; k 0; void send595 uchar temp //595控制 uchar i; for i 0;i 8;i++ SH 0; DS temp0x80; temp 1; SH 1; ST 0; delayms 1 ; ST 1; void dis595 //595发送段码 DA 0; send595 table1[sum[0]] ; DA 1; delayms 1 ; DB 0; send595 table[sum[1]] ; DB 1; delayms 1 ; DC 0; send595 table[sum[2]] ; DC 1; delayms 1 ; DD 0; send595 table[sum[3]] ; DD 1; delayms 1 ;