DCSYP—(32—71) 系列电机定子综合测试系统.docVIP

DCSYP— 32—71 系列电机定子综合测试系统 1.概述： 该系统适用于中小型电机，电机中心高H355以下电机定子嵌线后总装前的质量控制。系统由工业电脑主控，可预置被测电机定子标准参数，一次接线完成全部测试项目，自动分析、判断、统计各项测试结果并具有存储、打印等功能。 2.测试项目及精度等级： 绕组对铁芯工频耐压测试、相与相间耐压测试 3kVA, 0—3000VAC泄漏电流：0.2—100mA, 精度：2.0级 冲击匝间绝缘测试 电压：3000Vp, 视在波前时间：0.5μS, 通过各绕组冲击波形面积差、相位差自动判断各种不重合状况，确保1/200匝相邻匝间短路情况判断。 绕组直流电阻测试 0.005—200Ω, 精度：0.2级 环境温度自动补偿 绕组对铁芯绝缘电阻测试 DC500V, 1—500MΩ, 精度：5.0级 旋转方向 判定磁场旋转 DCSYP— 32—71 Comprehensive Testing System of Motor Stator 1. Brief Introduction: This system is used for quality controlling of middle and small motors and the center high of stator below H355 after embedded line on the motor-stator and before the motor-stator is assembled. This system adopts IPC control center, after the standard motor-stator parameters are preset, within one time of connection this system may complete all the testing items, and then automatically do analyzing, diagnosing and statistical processing for the testing results, and finally store and print the data. 2. Measuring Items and Precision Class: Winding-to-Core Shock-withstand Test at Working Frequency、Phase-to-Phase Shock-withstand Test 3kVA, 0—3000VAC;Leakage Current: 0.2—100mA;Precision Class: 2.0 Surge? Test Voltage: 3000Vp;Impulse Wave Before Ramp Time: 0.5μS; Automatic judgment of various not coincidence by comparing the difference of areas and phases in the surge waveform between various windings and insure the short circuit instance of adjacent turn-to-turn 1/200 Winding D. C Resistance Test 0.005—200Ω; Precision Class: 0.2;Automatic ambient temperature compensation Winding-to-Core Insulation Resistance Test 500VDC; 1—500MΩ;Precision Class: 5.0 Rotation Direction Find the rotation direction of magnetic field 定子综合测试界面