在esxi5.0u1中添加磁盘存储时出现错误.docxVIP

在esxi5.0u1中添加磁盘存储时出现错误问题描述：esxi系统是新安装的，原来的磁盘是使用SuperMicro? X7DB8主板自带的RAID功能做的RAID5（开机过程中显示是2个2+1的RAID5阵列），在esxi5.0u1中添加磁盘存储时有3块盘添加成功，另3块盘不能添加，出现错误。在esxi5.0u1中添加磁盘存储时出现错误：主机配置过程中出错。在ESXi“172.16.11.18”上调用对象“ha-datastoresystem”的“HostDatastoreSystem.QueryVmfsDatastoreCreateOptions”失败。在VC里添加磁盘存储时出现错误：在vCenter Server“00VCENTER50.gzcss.net”上调用对象“datastoreSystem-787”的“HostDatastoreSystem.QueryVmfsDatastoreCreateOptions”失败。解决方案：详细看了日志 没有特别明显的报错可能有2个方面 一是磁盘的lun头有脏数据 导致vmware不能识别头部 需清理掉才好 二是磁盘以前在vmware这边出现过PDL事件，意思是意外中断事故。第一个原因解决方法：Checking for non-msdosdisklabels and non-GPT partition table layoutsTo validate whether the target disk device contains an unsupported partition table layout:Open a console to the ESX or ESXi host. For more information, see Unable to connect to an ESX host using Secure Shell (SSH) (1003807) or Using Tech Support Mode in ESXi 4.1 and ESXi 5.x (1017910).Identify the disk device in question from the log messages. For more information, see Identifying disks when working with VMware ESX (1014953). For example:/vmfs/devices/disks/vml.0200030000600508b30093fcf0a05b5b8cc739002f4d5341313531Use the fdisk command to display the current partition table on the device.Using fdisk, run the command:# fdisk -l /vmfs/devices/disks/DeviceNameThe output appears similar to:Disk /vmfs/devices/disks/DeviceName: 536 MB, 536870912 bytes255 heads, 63 sectors/track, 65 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesDevice Boot StartEnd Blocks Id System/vmfs/devices/disks/DeviceName 1 66 524287+ eeEFI GPTMake note of the Id and System values (highlighted in red). Depending on the value of these fields, the ESX/ESXi host may not be able to understand the contents of the disk device, and refuse to make any changes. To allow the host to make any modifications to this volume, the volume must have an msdos partition or no partition at all.Changing the partition type in the ESX Service Console using the parted utilityThe command line utility parted can be used in the ESX S