成品AQL检验标准.doc

Revision History修改记录 Version 版本 Date 日期 Description change 变更履历 Revised by 更改人 1.0 Sep 25, 2006 Initial release（新发行） Steve Wang 1.1 Mar 09, 2007 Add the bed shear press point check, stability and static load test 增加床的剪切点挤压点检查、稳定性测试和静压测试（B、F、G） Steve Wang 2.0 Aug 19, 2010 Renew（更新） Lennon Wu Scope范围 This document specifies the general quality requirements for the category of Furniture including domestic furniture, outdoor furniture and office furniture, etc. It is used as a general guideline for inspection if clients have not defined their requirement. 此文件为针对家具产品(包括室内家具,户外家具,办公家具等)验货的通用标准。如果客户没有特别的要求，在此定为通用的验货指南。 Inspection Criteria of Product / Package产品/包装的验货标准 Reference standard: 引用标准 EN1725, EN747-1/2, EN716-1/2, EN1130-1/2, EN1728, EN1022, EN12520, EN12521, EN1335-1/2/3, EN1730, EN527-1/2/3, EN581-1/2/3, BS4875-1/5/7, ISO7170, BS14749 ASTM F 1427, BIFMA X5.1, BIFMA X5.5, ASTM F 1858, ASNI A 161.1 Product: 产品 Must be without any unsafe defect for using; 不允许有在实际使用中任何对使用者造成伤害的缺陷； Should be free of damaged, broken, scratch, crackle etc. Cosmetic / Aesthetics defect; 不应有任何损坏，破碎，擦伤，或碎裂等外观缺陷； Must be conform to the shipping market legal regulation / client’s requirement; 必须符合销往国当地的法规以及客户的要求； The construction, appearance, cosmetics and material of all units should comply with client’s requirement / approved samples; 产品的结构，外观，材料等必须符合客户的要求或与样品保持一致； All units should have full function complying with client’s requirement / approved samples; 产品功能必须符合客户的要求或与样品保持一致； The marking / label on unit should be legal and clear. 产品上的标记/标签必须符合法规要求且清晰明确。 Package: 包装 All units will be adequately packaged, and constructed from suitably robust materials, such that it arrives in store in a merchantable condition; 产品要有足够强度的材料构成的充分包装，使得货物以可销售的状态到达目的仓库； The packaging material can protect the goods from damage during transportation; 在运输过程中，包装材料能防止货物受损； The shipping mark, bar code, label (such as price