SMT换线指导文件：Profiling guideline in line changeover.docVIP

WORK INSTRUCTION 作 业 指 导 书 DOC. No. / 文件编号: FTPEI-151 REV./ 版本号: 01 PRODUCT/ 产品: ALL TITLE / 标题: Profiling guideline in line changeover 在产品转换中温度检验指导方计 PAGE/页数 1 OF 4 REVISION HISTORY / 版本记录 REVISION 版本 CHANGE DESCRIPTION 修改内容 ISSUER 发布者 RELEASE DATE 发行日期 01 Initial release/首次发行 Gibi Feng 2005.12.09 REMARK 备注 Distribute the WI to MBU,QA. APPROVAL DEPARTMENT NAME TITLE 部门 名字 职位 B2 ME B2 MBU B2 QA DMP-001-F2 . 01 1.0 Purpose/目的 To provide a profiling guideline for reflow and wave solder in line changeover to reduce line changeover time. 在生产线产品转换中, 提供回流炉和波峰炉的温度检验的指导方针, 以便减少产品转换时间。 Scope/范围 This document applies to all projects of Note: This procedure is only applied to the model that is ever used at this SMT line. 注意：该程序只适用于这个型号已在这条SMT生产线生产过的产品转换. Responsible./责任 PE: Change the program of reflow and wave solder, adjust conveyor chain of reflow, check the temperature, test temperature and provide profile of reflow and wave solder. PE: 转换回流炉和波峰炉的程序, 调整回流炉的传送链, 检查设备参数, 测试回流炉和波峰炉的温度及提供温度曲线图。 MBU: check the parameter of reflow and wave solder if they match with WI, and record the parameter. MBU: 检查设备的参数是否与WI一致, 并作好记录。 EE: Adjust the conveyor chain of wave solder; maintain the machine to ensure the function stability of reflow and wave solder. EE: 调整波峰炉的传送链, 进行设备的保养及维护以保证回流炉及波峰炉的稳定性。 QA: Qualify First Article as FA procedure. QA: 根据首板质量检查程序进行首板检查。 Procedure./程序 4.1 MBU notice PE and EE to change line according to actual production or PMC plan, place correct WI on line. 4.1. MBU根据实际生产情况或PMC的生产计划通知PE和EE对生产线进行产品转换, 并放置正确的WI到生产线上。 4.2 PE Change the program of reflow and wave solder, adjust conveyor chain of reflow, and check the parameter of program at once according to WI when they receive notice, and place the last time profile of this model to line. 4.2 PE接到通知后, 立刻转换回流炉和波峰炉的程序, 调整回流炉的传送链和检查参数是否与WI一致, 并放置上一次的该型号的温度曲线图到线上。 4.3 EE adjusts the conveyor chain of wave solder at once when they receive notice. 4.3 EE接到通知后, 立刻调整波峰炉的传送链。 4.4 MBU checks if the