GENERAL STAFF REQUIREMENT.doc

BATTERY OPERATED STACKER Qty. 12 电池供电堆垛器 1 Sponsoring Directorate Ordnance service Directorate Vendor quoted Model parameters for technical evaluation all points either comply with required specification or not 2 Approving Authority General staff equipment evolution committee 3 Technical scrutiny Carried out by Inspection and Technical Development 4 General The stacker is required for horizontal transportation and stacking of stores in intensive application such as large warehouses/depots. The machine should have fixed support arms which could lift stores to desirable heights. It should be easy to operate and maintain. 横向传送，机器需要安装有支臂，能把物品提升到满意的高度，机器易于操作和保养 5 Technical Details技术参数 a Operating type操作类型 Pedestrian/stand on/cabin b Load lift capacity提升负载 Minimum 最小1200 Kg c Load centre负载中心 Maximum 最大650 mm d 无噪声行驶速度 Minimum最小 5 km /hour e 额定噪声行驶速度 Minimum最小 4 km/hour f Lift Height 提升高度 Minimum最小 4000 mm g 额定负载下提升速度 Minimum最小 200 mm/ second h 额定噪声下提升速度 Minimum 最小100 mm/ second i Gradient坡度 without loud Minimum 10 % j Gradient with rated loud Minimum 08% k Service/parking brake刹车 1 stage electromagnetic brake电磁制动 l Drive motor/intermittent s 2 60 驱动马达 Compatible to equipment兼容 m Lift motor/intermittent rating S 11% Compatible to equipment n Steering system转向系统 Steering arm/ wheel转向操作杆/方向盘 o Speed control速度控制 Transistor stepless / electronic无极晶体管/电子的 p Steering arc操作弧度 180 degree q Bty capacity 电池容量 180-440 AH安时 r Bty voltage电压 24 Volt DC s Should have battery status indication feature 需要电池状态指示 t Should preferably have battery charging facility built in 内置电池充电装置 Dimensions, mm a Wheel base轴距 Minimum 1350mm b Platform height平台高度 Minimum 150mm c Platform length平台长度 Minimum 400mm d Height of lower fork下叉高度 Maximum 100 mm e Fork thickness叉厚 Minimum 65 mm f Fork width叉宽 Minimum 180 mm g Fork length叉长 Minimum 1150 mm h Width across fork 叉横贯长 Minimum 570 mm i Turning radius, without/with platform up/d