铝银粉检查表.doc

Recommend Practice A.4.1 Safe Handling and Processing of Aluminium Pigments-CHECKLIST Yes No Comments 3.2 Pigment Selection Do you use very high risk grades(MIEMJ)? I am not sure with this but attached a list about the AL we used and storage Do you have a program to reduce high risk grades? No formal for the needs of customer 3.3 Pigment Storage Do you store miniumum quantities of AL?Typically how much? See the attached list Do you store in original containers (secured lids)? Do you store in a segregated area away from production/traffic? Do you store Al at ground level only? No higher thantwo layer is required for the limit of storage area Is lighting dust protection rated? (Note applies to processing and storage area) Do you have a dry spillage procedure? 3.4 Pigment handling Do you have dry sand available? Do you have metallic non sparking earthed shovels/scoops available? Do you have ST3rated Cental Vacuum and /or portable ST3 vacuum? Do you have a procedure for aluminium waste disposal(sealed metal drum)? 3.5 Operator Guidelines Do you have Documented Operator training ? Does training include –Aluminium Hazard awareness Does training include –Emergency/Fire procedures? Does training include –Local Standard Operating/supervised? Are operators competent –experienced(3 months)/trained/supervised? Is mandatory PPE enforced –nitrile gloves safety glasses anti static footwear? 3.6 Reduce lgnition Potential Is resistance to earth of conductive plant10 ohms? Are resistance to earth checks recorded ? Is electrical equipment to IP65 standard? Are rarth connections robust and visible? Is unfixed equipment earthed when in use? Are Operators trained re earthing connections? Does Operator training include avoidance of tramp metal(nuts bolts etc)? Do you use a foot plate conductivity tester to check shoes are anti static ? Ins