HOLT-1573 TRANSCEIVER简介.docVIP

HOLT-1573 TRANSCEIVER MIL-STD-1553 Dual 3.3V Transceiver HI-1573 / HI-1574 Holt Integrated Circuits continues its support of the MIL-STD-1553 data bus with a true single chip, dual 3.3V transceiver. Using proven design techniques and state-of-the-art analog CMOS technology, the new HI-1573 dissipates only 340mW when transmitting at 100% duty cycle while still delivering the required power to the bus. Each set of receiver outputs can also be independently forced to the bus idle state (logic 0” on HI-1573 or logic “1” on HI-1574) by setting RXENA or RXENB low. The part is available in a small, 20-pin SOIC package with an integrated metal heat sink in the base of the device that ensures adequate heat dissipation in even the most demanding environments. Measuring only 0.5 x 0.4 inches, and only 0.1 inch thick, the HI-1573 offers the smallest board footprint available for this function, and is small enough even for PCMCIA applications. The HI-1573 uses the same, industry standard 1:2.5 turns ratio transformer as Holt’s 5V parts. Samples of the HI-1573 and HI-1574 are readily available in the small thermally enhanced plastic SOIC as well as in the traditional 20-pin ceramic DIP package. Compliant to MIL-STD-1553A B, and ARINC 708A 3.3V Single Supply Operation CMOS Technology for Low Standby Power Smallest Footprint Available in 20-Pin Plastic ESOIC (Thermally Enhanced) Package Less Than 0.5W Maximum Power Dissipation Available in DIP and Small Outline ESOIC Package Options Industrial Extended Temperature Ranges Available Industry Standard Pin Configurations MIL-STD-1553 Interfaces Smart Munitions Stores Management Sensor Interfaces Instrumentation Test Equipment DESCRIPTION TheHI-1573andHI-1574arelowpowerCMOSdual transceiversdesignedtomeettherequirementsofthe MIL-STD-1553specification. Separatetransmitterinhibitcontrolsignals areprovidedforeachtransmitter. Thereceiversectionoftheeachbusconvertsthe1553bus bi-phasedifferentialdatatocomplementaryCMOS/