In accordance with the requirements of the technical standards and technical regulations work.docVIP

In accordance with the requirements of the technical standards and technical regulations work. Perform technical standards and technical regulations shall, in accordance with the standards and procedures to carry out the technical work. So, in the process of the project, first of all should be familiar with what are the standards and procedures, and should organize relevant personnel to study, and in the process of concrete operation strictly comply with them. 3. Based on technical management system. Technical management system generally includes: the construction drawings will be checked, the construction organization design management system, technical disclosure system, construction materials and equipment inspection system, engineering quality inspection approval system, technology organization measures system, engineering construction technique data management system, etc. The basis of it is to do a good job of technical management. 4. The requirement of scientific experiment. In the project implementation, materials, equipment, process scheme, the determination of some technical parameters and so on, may need to aid decision making by using the method of conducting scientific experiments. 5. Technical training requirements. In a planned way to carry out the technical training of technical personnel and operators, to meet the requirements of project construction technology. 6. four new job requirements. Constant promotion and application of new technology, new process, new material, new equipment, promote construction level enhances unceasingly. 7. Check the guide requirements. Project department director and technical personnel should often deep construction site inspection technology; To guide the construction work, strictly according to the figure construction, implement the technical proposal; To correct the violation operation, stop the violation of the process discipline; Timely processing of construction technical issues. 8. Problems existed in processin