ds18b20中英文资料.docVIP

FEATURES Unique 1-Wireinterface requires only one port pin for communication Each device has a unique 64-bit serial code stored in an onboard ROM Multidrop capability simplifies distributed temperature sensing applications Requires no external components Can be powered from data line. Power supply range is 3.0V to 5.5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5C accuracy from –10°C to +85°C Thermometer resolution is user-selectable from 9 to 12 bits Converts temperature to 12-bit digital word in 750ms (max.) User-definable nonvolatile (NV) alarm settings Alarm search command identifies and addresses devices whose temperature is outside of programmed limits (temperature alarm condition) Available in 8-pin SO (150mil), 8-pin SOP, and 3-pin TO-92 packages Software compatible with the DS1822 Applications include thermostatic controls, industrial systems, consumer products, thermometers, or any thermally sensitive 特征： 独特的单线接口，只需 1 个接口引脚即可通信 每个设备都有一个唯一的64位串行代码存储在光盘片上可以从数据线供电电源电压范围为3.0V至5.5V ° C 至+125 ° C（-67 ° F至257 ° F-10℃至+85 ° C ° C温度计分辨率是用户可选择的9至12位750ms 用户可定义的 非易失性的温度告警设置 告警搜索命令识别和寻址温度在编定的极限之外的器件 （温度告警情况） 采用8引脚SO（150mil），8引脚SOP和3引脚TO - 92封装软件与DS1822兼容 DESCRIPTION The DS18B20 Digital Thermometer provides 9 to 12–bit centigrade temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of –55°C to +125°Cand is accurate to
0.5C over the range of –10°C to +85°C. In addition, the DS18B20 can derive powerdirectly from the data line (“parasite power”), eliminating the need for an external power supply. Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1–wire bus; thus, it is simple to use one microprocessor to contr