英语半导体道路照明.pptVIP

Semiconductor road lighting Only use 34% of the power consumption to make the same effect Foreword LED is a lighting revolution after lamp was invented by Thomas Edison. LED consumes 10%-15% of incandescent lights’ power and 30%-40% of high pressure sodium lamp’ power. It’s promising that LED lighting will light the world in near future. Comparison between high pressure sodium(HPS) lighting and LED lighting LED Street Light (30W) LED Street Light (30W) Wattage: Using 30 pieces of LEDs with each LED 1W.Shell design: The lamp uses one time moulding high pressed die-casting Aluminum shell, integrating luminaire and shell together. It can emanate the heat very well and its working temperature is below 60 degree centigrade.Patent No.: 200730115862.xIt has the trait of self-invented LED dot luminaire light matching function. The lamp pole can be 4m-6m and the average available illumination can be 10LX.LED Wattage　　　　　　30W Working wattage　　　　37W Lumens　　　　　　　　 2100 lm Illumination　　　　　 20 lx Average illumination　 10 lx Pole to pole distance　30M Pole height　　　　　　4-6M Rating wattage　　　　 50W Protection level　　　 IP65 Color temperature　　　3700K-5500K Working temperature　　-25~+45 degree centigradeWorking voltage　　　　AC100V---240V50HZ/60HZ Working current　　　　350 mA Power factor　　　　　 ≥0.85Application: Road/Street lightings for city road, residential area, garden, public square, park and so on. LED Street Light (60W) LED Street Light (60W) Wattage: Using 60 pieces of LED with each LED 1W.Shell design: The lamp uses one time moulding high pressed die-casting Aluminum shell, integrating luminaire and shell together. It can emanate the heat very well and its working temperature is below 60 degree centigrade.Patent No.: 200730115862.xIt has the trait of self-invented LED dot luminaire light matching function. The lamp pole can be 6m-8m and the average available illumination can be 15LX. It’s applicable in city road lighting.LED Wattage　　　　　　60W Working wattage