UNIT_5 Static Measure CN.pptVIP

Static Measurement静电测量 Static Measurement Devices静电测量器具 Static Measurement Devices静电测量器具 Static Measurement Devices静电测量器具 Static Measurement Devices静电测量器具 Static Measurement Devices静电测量器具 Static Measurement Devices静电测量器具 Static Measurement Devices静电测量器具 Taking Static Measurements进行静电测量 Use care when working around moving webs and machinery to avoid personal injury. 在运转的设备附近工作时应注意避免人身伤害. Be sure that static instruments to be used are rated for the classification of area where measurements are to be taken. 确保使用的静电测量仪器符合使用区域对于电器防爆的要求. Hold instrument the proper distance from the surface being measured. Refer to manufacturer’s instructions. 保持测量仪器和被测量表面之间的正确距离. Taking Static Measurements进行静电测量 Select measurement points to give meaningful data: 合理选择测量点: Machine frame members 设备框架 Rolls 辊桶 Static control devices 静电控制装置 Static impact hazard locations 静电影响危险区域 No closer than 152 mm 6 inches to any one piece of grounded metal 离开任何一个接地金属152毫米 At least 305 mm 12 inches from each of two or more grounded objects. 离开两个以上接地物体305毫米以上 Taking Static Measurements进行静电测量 Take multiple readings across web, down web, multiple locations, etc. 进行多重读数 横贯线, 在线以下, 多个位置 Record time, date, name of person doing tests, etc. and test reading values. 记录时间, 日期, 测量人员以及测量数值. Taking Static Measurements进行静电测量 Prepare a sketch or diagram or use a drawing to locate the specific points at which the measurements were taken. 准备一张图,以标识测量的位置 If readings don’t make sense, analyze for what may be wrong: 如果测量结果不正常, 分析可能的原因: Static control devices not effective 静电控制装置失效 Location where measurement was taken 测量的位置 Instrument calibration and use 仪器的校验和使用 Taking Static Measurements进行静电测量 Static measurements should be taken: 静电测量应在下列情况下进行: After change overs 完成转换以后 After events that may cause damage to static control equipment在发生可能损坏静电控制设备的事件以后 During experimental runs 在试生产过程中 If static related problems are suspected如果发现有和静电有关的问题 At the beginning of each shift during normal operation