基于DSP的无线带DQPSK调制解调器的硬件设计学士学位论文.docVIP

北方民族大学 学士学位论文 论文题目: 基于DSP的无线基带DQPSK调制解调器的 硬件设计 院(部)名 称: 电气信息工程学院 学 生 姓 名: 李茹枫 专 业: 信息工程 学 号: 指导教师姓名: 郑华 论文提交时间: 2013年5月20日 论文答辩时间: 2013年5月25日 学位授予时间: 北方民族大学教务处制  摘 要 调制解调器是将数字信号和模拟信号互相转换的设备 。近年来，随着现代科学技术的快速发展，人们对调制解调器的传输速率以及各项性能指标有了更高的要求由于DSP具有精确、灵活、抗干扰能力强、可靠性好、体积小、等特点，基于DSP技术的调制解调器在通信系统中得到越来越广泛的应用。 本文了一种基于DSP的无线基带DQPSK调制解调器的设计方法调制解调器硬件以 DSP芯片为核心， 关键词:DSP,基带,调制解调器 ABSTRACT Modulator-demodulator is a device that can interconvert the digital signal and the analog signal. In recent years, with the rapid development of modern science and technology, people have higher requirements on the transmission speed and other performance indicators of the modem. Due to DSP have features like precision, flexibility, high anti-interference ability, good reliability, small size and light weight, real-time processing with DSP devices has become a new hot spot of the current and future technology development. Modem based on DSP technology has been more widely used in communication system. This paper describes the design of a wireless base band DQPSK modem based on DSP. Firstly, it analyzes the various modulation techniques, and then focuses on the working principle of QDPSK modulation.The modem hardware uses TMS320C5509 DSP chip as the core, including program memory, data memory, ADC, DAC, anti-aliasing filter and control logic circuit (usually realize with CPLD or FPGA), power conversion circuit, clock circuit and reset circuit. The paper which focuses on hardware design, introduces the JTAG interface, power supply circuit, reset circuit, clock circuit and interface design of A/D D/A conversion with C55x. KEY WORDS: DSP, base band, modem  目 录 前 言 1 第1章 绪 论 2