实验1图形用户界面设计.docVIP

实验1 图形用户界面设计-公式应用 关键程序： curr=get(handles.edit1,string); volt=get(handles.edit2,string); res=get(handles.edit3,string); if curr==0 volt=str2num(volt); res=str2num(res); current=volt/res; current=num2str(current); current=strcat(current,A); set(handles.text7,string,current) elseif volt==0 curr=str2num(curr); res=str2num(res); voltage=curr*res; voltage=num2str(voltage); voltage=strcat(voltage,V); set(handles.text7,string,voltage) elseif res==0 curr=str2num(curr); volt=str2num(volt); resistance=volt/curr; resistance=num2str(resistance); resistance=strcat(resistance,Ω); set(handles.text7,string,resistance) end 实验2 单自由度无阻尼振动系统 function pushbutton1_Callback(hObject, eventdata, handles) % hObject handle to pushbutton1 (see GCBO) % eventdata reserved - to be defined in a future version of MATLAB % handles structure with handles and user data (see GUIDATA) set(handles.edit1,string,10); set(handles.edit2,string,0); set(handles.edit3,string,0); set(handles.edit4,string,0); cla(handles.axes1,reset); % --- Executes on button press in pushbutton2. function pushbutton2_Callback(hObject, eventdata, handles) % hObject handle to pushbutton2 (see GCBO) % eventdata reserved - to be defined in a future version of MATLAB % handles structure with handles and user data (see GUIDATA) t0=str2num(get(handles.edit1,string)); x0=str2num(get(handles.edit2,string)); v0=str2num(get(handles.edit3,string)); wn=str2num(get(handles.edit4,string)); t=0:0.001:t0; xt=(sqrt(x0^2+(v0/wn)^2))*cos(wn*t-atan2(x0*wn,v0)); axes(handles.axes1); plot(t,xt) 实验3 有阻尼振动系统 %Tegning af sdof oscillator clear all; %System data m=1.0; zeta=0.01; omega0=1.0; Dt=1.0; f0=1.0; x0=0.0; dotx0=0.0; xmax=sqrt(x0^2+(dotx0/omega0)^2)+min([0.5*abs(f0)*Dt/(m*omega0) f0/omega0^2]); omegad=omega0*sqrt(1-zeta^2); dt0=0.1*pi/omega0; nstep=500; a=0.70; b=0.70; r=0.35*a; fact=0.50/xmax; xf0=0.5*[0 -a 0 a 0]; yf0=[0 -b/4 -b/2 -3*b/4 -b]; xd1=0